Rupert Neve Designs Portico 5012V Duo Mic Preamplifier
Rupert Neve Designs Portico 5012V Duo Mic Preamplifier
- 70 % Off$45,886.50
Description
The vertical Rupert Neve Designs 5012 Duo Mic Preamplifier is a dual-channel microphone pre-amplifier built with Rupert Neve’s custom input and output transformer circuits. The pre-amplifier is electronically balanced and designed to minimize the effects of hum, radio interference, and other dissonant noise from altering your sound. The vertical version of this module is a half-rack unit intended to be mounted in a small vertical rack or a bracket or tray that is itself mounted in a conventional 19″ horizontal rack.The microphone inputs use a transformer-like-amplifier chip and a toroidal Common Mode Rejection low-pass filter to reject frequencies above 150,000 Hz. This prevents odd high-frequency harmonics from altering the sound quality of your recording signal chain. After the high-frequency rejection stage, the pre-amp uses an input transformer that provides +25 dBu of input signal at unity gain without the need for a pad. The combination of an electronically balanced circuit with a true transformer amplifier stage allows the device to retain the Rupert Neve’s sound in a small form factor.The back panel of the device features an XLR input for channels A and B, an XLR output for each channel, and 4 x 1/4″ TRS connectors for connecting Portico bussing modules to the signal chain.
Rupert Neve Designs Portico 5012V Features:
- SilkThe Silk knob on the front panel of the pre-amplifier reduces negative feedback and adjusts the frequency response of the signal to make the sound smoother and more pleasing
- Level MeterEach channel in the pre-amplifier features an output-reference level meter ranging from -30 to 22 dBu
- MuteThe Mute button cuts the output signal post metering and pre-buss output in the signal chain
- High-Pass FilterThe pre-amp includes a High-Pass Filter that allows you to attenuate signals between 20 and 250 Hz. This is useful for removing motor hum, air, handling noise, and building rumble from the signal chain
- Phantom PowerThe pre-amp can provide 48V of phantom power to each channel
- Buss OutputFor connecting the pre-amp to other Portico Buss Amp/Monitoring modules, the pre-amp includes an unbalanced high-impedance Buss output. A TRS patch cord is used to connect the pre-amp to the other Portico unit
- Phase ButtonThe pre-amplifier includes a Phase button that inverts the output polarity 180 degrees.
Rupert Neve Designs Portico 5012V Specifications:
- Connectors
2 x balanced XLR microphone connectors
2 x balanced XLR connectors
4 x 1/4″ TRS bussing module connectors
-
Frequency Response
Main Output, no load
-0.2 dB at 10 Hz
-3 dB at 160,000 Hz
Buss output measured at the 5014 monitor Buss-Mix Amplifier Output
-0.2 dB at 10 Hz
-3 dB at 160,000 Hz
-
Noise Measured at Main Output, unweighted, 22 to 22,000 Hz
Terminated 150Ω
With gain at unity: better than -100 dBu
With gain at 66 dB: better than -62 dBu
Equivalent Input Noise: better than -128 dBu
Noise Factor: 1.5 dB
-
High-Pass Filter Continuously variable swept frequency from 20 to 250 Hz Slope: 12 dB/octave
-
Gain Unity to 66 dB in 6 dB steps
Trim continuously adjustable from -6 to 6 dBBuss I/O Output is designed to feed the 5014 Monitor Buss mix amplifier at the internal system level of -2.5 dBu
Output level of the 5014 is equal to that of the 5012
-
Maximum Output Level Maximum Output from 20 to 40,000 Hz: 25 dBu
-
Mute Mutes main output only
-
Total Harmonic Distortion/Noise At 1,000 Hz: 20 dBu output
Main Output: better than 0.001%
Buss Output measured at the 5014 monitor buss-mix amplifier output: better than 0.002%
At 20 Hz, 20 dBu output
Main Output: better than 0.002%
Silk Engaged: better than 0.2% second harmonic
-
Crosstalk Measured channel to channel: better than -90 dB at 15,000 Hz
-
Phantom Power +48 VDC ±1%
-
Power Requirements Voltage range: 9 to 18 VDC
-
Current Consumption:
At 9 VDC, current is 1.3 A typical: Power= 11.7W
At 12 VDC, current is 1.0 A typical: Power= 12.0W
At 15VDC, current is 0.8 A typical: Power= 12.0W
At 18VDC, current is 0.65 A typical: Power= 11.7W
-
Dimensions (LxHxD)9 x 1.75 x 8.5″ (22.86 x 4.45 x 21.6 cm)
-
Weight 8 lb (3.6 kg)
Made in USA
Additional information
Title | Default Title |
---|